DJI Mavic 3 - Approval pack - S1/S2/S3
Indispensable for your professional services, our S1/S2/S3 certification pack allows you to transform your DJI Mavic Air 2 into a DGAC approved S1/S2/S3 drone.
This pack includes the Zephyr circuit breaker for DJI Mavic Air 2, the assembly of the Zephyr circuit breaker module on the Mavic Air 2 drone and the S1/S2/S3 homologation documents.
The circuit breaker module contains the electronics dedicated to the motor shutdown system and the wireless communication module. A drone equipped with a Zephyr circuit breaker is not distinguishable from the exterior of an original Mavic Air 2.
The remote control module consists of a red adhesive base, an oval ignition button on the back, a triangular motor cut-off button, an indicator LED, three white battery level LEDs, an expansion port on the left side and a USB port on the right side for charging.
S1 / S2 / S3 homologation documents include:
- type design certificate
- the certificate of conformity to type
- the use and maintenance manual
The circuit breaker is assembled by us in our workshop in Remiremont.
Please note : the transport costs of your equipment are at your expense.
Data sheet
- Wireless radio communication
- SRD860 avec clé cryptée
- Radio range
- Up to 1500 m
- Operating temperature
- -15 à 40°C
- FTS module weight
- 7 g
- Radio autonomy
- 10 h
Indispensable for your professional services, our S1/S2/S3 certification pack allows you to transform your DJI Mavic Air 2 into a DGAC approved S1/S2/S3 drone.
This pack includes the Zephyr circuit breaker for DJI Mavic Air 2, the assembly of the Zephyr circuit breaker module on the Mavic Air 2 drone and the S1/S2/S3 homologation documents.