search

Yuneec H520/H520e - S1 / S2 / S3 homologation pack

€749.00
Tax included

Essential for your professional services, our S1/S2/S3 certification pack allows you to upgrade your Yuneec H520/H520e into a DGAC certified drone.

This pack includes the IDRsys circuit breaker for Yuneec H520/H520e, the assembly of the IDRsys circuit breaker module on the Yuneec H520/H520e drone and the S1/S2/S3 homologation documents.

Quantity

The circuit breaker module contains the electronics dedicated to the motor cut-off system, the wireless communication module and a power supply battery independent of the drone battery. It consists of a black ignition button, located next to the antenna, and an indicator LED. A micro USB port is available to recharge the system's internal battery.A power connector on the other side of the case allows the circuit breaker module to be connected to a drone previously equipped with an IDRsys motor breaker cord by a dealer.The remote control module also has a black power button next to its antenna, a LED indicator and a USB port for charging on the side.

S1 / S2 / S3 homologation documents include:

  • type design certificate
  • the certificate of conformity to type
  • the use and maintenance manual

The assembly of the circuit breaker is carried out by us in our workshops located in Remiremont. 

ATTENTION: the transport costs of your material are at your charge. 

Homologation H520 + IDRsys CC H520 + Montage CC H520

Data sheet

Wireless radio communication
SRD860 avec clé cryptée
Radio range
Up to 1500 m
Operating temperature
-15 à 40°C
Circuit breaker module weight
110 g
Motor shutdown device
Power cut
Circuit breaker / radio autonomy
Infinite (recharged by the drone) / 10 h