Beacon Light V2
€109.00
Tax included
With receive mode
The Zéphyr Beacon Light V2 remote identification beacon allows any aircraft to comply with the decree of December 27, 2019. It is intended for drones not equipped by default with the device and which have a 5V output. at 8.4V to power the beacon.
It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.
The Light beacon is to be integrated inside the drone and it must be powered by a voltage source of 5V to 8.4V. An LED indicates its status. Its featherweight of only 11 g allows the device to be integrated on very small aircraft. Its low consumption of 40 mA on average does not penalize the autonomy of the drone. It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.
Zéphyr BCN LGT V2
10 Items
2021-02-09
Data sheet
- Frequency
- 2,4 GHz (2437 MHz)
- WIFI channel
- 6
- Antenna
- interne
- Scope
- 1500 meters
- Total weight
- 17 g
- Sizes
- 35 x 24 x 17 mm
- Supply voltage
- 5 à 12V
Customers who bought this product also bought:
With receive mode
The Zéphyr Beacon Light V2 remote identification beacon allows any aircraft to comply with the decree of December 27, 2019. It is intended for drones not equipped by default with the device and which have a 5V output. at 8.4V to power the beacon.
It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.