Beacon AM
€40.00
Tax included
With receive mode
The Zéphyr Beacon AM remote identification beacon allows any model to comply with the decree of December 27, 2019. It is powered via a 3-pin JST JR plug between 4.2V to 8.4V. The beacon is delivered with a solder connector and a heat-shrinkable sleeve.
It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.
The Beacon AM beacon is to be integrated inside the scale model, it must be supplied by a voltage source of 4.2V to 8.4V. An LED indicates its status. Its featherweight of only 9 g allows the device to be integrated on very small scale models. Its low consumption of 40 mA on average does not penalize the autonomy of the model aircraft. It is delivered with a 3-pin JST JR socket for soldering (compatible with most receivers: FUTABA, GRAUPNER, etc.) and a heat-shrinkable sleeve. It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.
Zéphyr BCN AM
Data sheet
- Frequency
- 2,4 GHz (2437 MHz)
- WIFI channel
- 6
- Antenna
- interne
- Scope
- 1500 meters
- Total weight
- 17 g
- Sizes
- 35 x 24 x 17 mm
- Supply voltage
- 3,7 à 12 V
Specific References
- EAN13
- 3770013280528
- MPN
- Zéphyr BCN AM
You might also like
Customers who bought this product also bought:
With receive mode
The Zéphyr Beacon AM remote identification beacon allows any model to comply with the decree of December 27, 2019. It is powered via a 3-pin JST JR plug between 4.2V to 8.4V. The beacon is delivered with a solder connector and a heat-shrinkable sleeve.
It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.