search

Beacon AM

€40.00
Tax included

With receive mode

The Zéphyr Beacon AM remote identification beacon allows any model to comply with the decree of December 27, 2019. It is powered via a 3-pin JST JR plug between 4.2V to 8.4V. The beacon is delivered with a solder connector and a heat-shrinkable sleeve.

It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.

With welded connector and sheath
With jumper for HV mode
Quantity

The Beacon AM beacon is to be integrated inside the scale model, it must be supplied by a voltage source of 4.2V to 8.4V. An LED indicates its status. Its featherweight of only 9 g allows the device to be integrated on very small scale models. Its low consumption of 40 mA on average does not penalize the autonomy of the model aircraft. It is delivered with a 3-pin JST JR socket for soldering (compatible with most receivers: FUTABA, GRAUPNER, etc.) and a heat-shrinkable sleeve. It has a web interface that allows you to check the operation of the beacon and display other nearby beacons in reception mode.

Zéphyr BCN AM

Data sheet

Frequency
2,4 GHz (2437 MHz)
WIFI channel
6
Antenna
interne
Scope
1 km
Weight
17 g
Dimensions
35 x 24 x 17 mm
Supply voltage
3,7 à 12 V

Specific References

EAN13
3770013280528
MPN
Zéphyr BCN AM

You might also like