Includes the Thales ScaleFlyt Geocaging solution

European leader in professional drone safety accessories

DRONE GEOCAGING SOLUTIONS

Flying drones close to critical areas is no easy matter. The risk of a drone entering a restricted area is high. Zephyr CC & ScaleFlyt Geocaging is a secure drone containment solution that complies with EASA MOC 2511. Zephyr CC & ScaleFlyt Geocaging is SORA’s most advanced ground-based risk reduction system, enabling the drone to operate in a complex environment.

Automatic & intelligent FTS

Compatible with all drones

Wireless add-on module connected to the FTS

CREATE YOUR SECURE FLIGHT ZONE

The Zephyr CC & ScaleFlyt Geocaging FTS module allows you to create a virtual cage representing the flight area of your drone in order to fly your missions in complete serenity. Thanks to the compatibility between the Geocaging system and our FTS systems, if the drone leaves the flight envelope, the engine cut-out automatically triggers a stop, ensuring that your drone stays within the limits you have set.

GET LIVE ALERTS, TAKE BACK CONTROL

The Zephyr CC & ScaleFlyt Geocaging FTS module will alert you if your drone approaches the limit of the flight zone too closely and risks crossing it. You can then correct its trajectory. If necessary, this module, coupled with the drone’s FTS, will automatically shut down the engine and alert you.

UNLOCK YOUR MOST COMPLEX FLIGHT MISSIONS.

The Zephyr CC & ScaleFlyt Geocaging module can be used, for example, to secure out-of-sight flights (BVLOS) for drones used in agriculture, or new air corridors dedicated to drone transport. Compliant with MOC2511, this module was used to ensure the safety of the largest drone show in Europe.

OUR GEOCAGING SOLUTIONS

Find the system you need

WIRELESS CONNECTION TO DRONAVIA FTS

ADD-ON MODULE

Installation of the module takes only a few seconds and does not require any intervention inside the drone.
E

MOC 2511 compliance

E

Compatible with all Dronavia's FTS & PRS

E

Weighs just 70g

E

Powered by a 5V socket

WIRED CONNECTION FROM AUTOPILOT TO ESCS

FTS MODULE

Wiring connection between the autopilot and the ESCs (up to 8 universal channels). The connector datasheet with the different PINouts can be provided on request.
E

MOC 2511 compliance

E

Can be wirelessly pre-paired to a Dronavia's PRS

E

Weighs just 70g

E

Powered by a 5V socket

NEEd help ? Contact Us.

We will get back to you as soon as possible.

Office Location

7 Avenue Julien Méline – Remiremont (88200) – FRANCE

Open Hours

Monday to Friday  :  9h00 – 17H00

Email

distri@dronavia.com