New EASA-compliant version available

90,83  excl. VAT

INTEGRATED DIRECT REMOTE ID

FLY ID
LIGHT

Fly ID is a direct remote identification devices compatible with all drones. Be visible, fly safe by opting for the simplest way to fly your drone in compliance with the latest European regulations. The Fly ID Light is to be integrated inside the drone and it must be powered by a voltage source from 4.2V to 8.4V. Its light weight of only 9 g allows the device to be integrated on very small aircraft. It is delivered with a 3-pin JST JR solder plug.

EUROPEAN CERTIFICATIONS

EASA UPDATES

All UAVs introduced after 1 January 2024 are subject to class C certification (C0 to C6). This class C certification meets the requirements for direct remote identification defined by the EASA standard ASD-STAN EN 4709-002. The Fly ID Light system enables any aircraft to comply with the latest standards imposed by the EASA.

Easily integrated

Web interface for settings

Ultra-light system

Compatible with trackers app

Direct Remote Identification

Fly ID Light systems transmit the identity of your drone via Bluetooth 2.4GHz to anyone equipped with a receiving device. 

The system transmits the drone’s serial number, take-off position, latitude, longitude, altitude, speed and direction. As well as making airspace safer, this is a highly effective way of finding a drone that has lost its link and/or crashed.

Ultra-light system

Its light weight of just 11g and dimensions of 35x21x13 (mm) mean it can be integrated into very small drones.

Low consumption

Its low consumption of 40 mA on average does not penalize the autonomy of the drone.

Web interface from your mobile

Fly ID Pro system has a web interface that can be accessed from any device via a WIFI connection. The web interface is only active when the system is being initialised (LED flashing yellow), and is deactivated after 30 seconds once the GPS signal has been acquired (LED flashing green).

You can use it to configure the beacon with your operator number and update the system.

 

Flight Management

Fly ID Pro tags are compatible with drone tracking applications such as DroneScanner and OpendroneID. Connect to these applications and easily manage your flights.

Standards for multiple geolocation

For up-to-date, reliable positioning, Fly ID receives GPS, Galileo, SBAS and GLONASS signals.

Compatibility & options

It is delivered with a 3-pin JST JR solder plug (compatible with most receivers: FUTABA, GRAUPNER, etc.) and a heat-shrink tube.  

Grams only

VOLT POWERED BY A VOLTAGE SOURCE

Kilometers of range

Bluetooth range

dimensions in CM

Working temperature

Sensors
GNSS
Built-on Antenna
Bluetooth & GNSS
Battery
Lipo 3.7V 420 mAh
FAQs
Find the answer to your question quickly & easily

What is a Direct Remote Identification (DRI) system?

Direct Remote Identification (DRI) system transmits your drone’s basic information digitally via Bluetooth 2.4GHz to anyone equipped with a receiving device.  The system transmits the drone’s serial number, take-off position, latitude, longitude, altitude, speed and direction. As well as making airspace safer, this is a highly effective way of finding a drone that has lost its link and/or crashed.

Why equip your drone with a Direct Remote Identification system?

The Direct Remote Identification (DRI) systems are intended for drones that are not equipped with this device by default, and for drone manufacturers wishing to integrate the device into their aircraft.

These systems enable any drone to comply with the latest European regulations imposed by the EASA.

How do I connect to the Direct Remote Identification interface?

The Fly ID system has a web interface that can be accessed from any device via a WIFI connection. The web interface is only active during system initialisation (LED flashing yellow), and is deactivated after 30 seconds once the GPS signal has been acquired (LED flashing green).

Find the name of the Fly ID wifi network, then connect to this network. Open a browser, go to the address 192.168.1.1 and you’ll be connected to your beacon’s web interface.

How do I link my Direct Remote Identification system to my operator number?

Log in to your Fly ID’s web interface.

Click on “Settings”, then enter the type of aircraft and your operator number.

Your Direct Remote Identification (DRI) systems is now linked to your operator number.

 

What regulations do Dronavia's Direct Remote Identification systems comply with ?

The Fly ID range comply with the prEN 4709-002 standard, which requires direct remote identification for drones weighing more than 250 grams and flying at less than 120 metres in the specific category.

The Beacon AM remote identification beacon enables drones to comply the French DGAC Order of 27 December 2019.

For which drones should a Direct Remote Identification systems be used?

The use of a Direct Remote Identification (DRI) systems is mandatory for all drones (aircraft) weighing more than 250g that are not equipped with this device as standard.

Why do Direct Remote Identification systems have a web interface?

Fly ID systems have a web interface that can be accessed via WiFi to configure the beacon with your operator number and update the system.

Are Direct Remote Identification system visible on drone tracking applications?

All Direct Remote Identification (DRI) systems work with drone tracking applications (such as DroneScanner and OpendroneID). Open your application, start your system and it will appear on your application. You can retrieve all flight information from the application, and easily manage your flights.

E
Fly ID
E
Fly ID Pro
E
Fly ID Light
E
Zephyr Beacon AM