New EASA-compliant version available

165,83  excl. VAT

PLUG & PLAY DRI

FLY ID PRO

Fly ID Pro is a direct remote identification devices compatible with all drones. Be visible, fly safe by opting for the simplest way to fly your drone in compliance with the latest European regulations. The Fly ID Pro add-on module can be easily installed and removed from the drone in a matter of seconds.

EUROPEAN COMPLIANCE

EASA UPDATES

Comply with the prEN 4709-002 standard, which requires direct remote identification for drones weighing more than 250 grams and flying in open or specific category.

Ultra-strong attachment system

Web interface for settings

Ultra-light system

Compatible with trackers app

Direct Remote Identification

Fly ID Pro systems transmit the identity of your drone via Bluetooth 2.4GHz to anyone equipped with a receiving device. 

The system transmits the drone’s serial number, take-off position, latitude, longitude, altitude, speed and direction. As well as making airspace safer, this is a highly effective way of finding a drone that has lost its link and/or crashed.

Long range

The external antenna gives a range of up to 3 km in optimum conditions.

Ultra-light system

Its light weight of just 30g and dimensions of 35x24x19 (mm) mean it can be integrated into very small drones. The size of the antenna is 8.8 x 0.77 (mm).

Battery & Charging

Thanks to its built-in battery, rechargeable via 5V Micro-USB, Fly ID Pro has a battery life of 5 hours.

Web interface from your mobile

Fly ID Pro system has a web interface that can be accessed from any device via a WIFI connection. The web interface is only active when the system is being initialised (LED flashing yellow), and is deactivated after 30 seconds once the GPS signal has been acquired (LED flashing green).

You can use it to configure the beacon with your operator number and update the system.

 

Flight Management

Fly ID Pro tags are compatible with drone tracking applications such as DroneScanner and OpendroneID. Connect to these applications, enter your ID and easily manage your flights.

Standards for multiple geolocation

For up-to-date, reliable positioning, Fly ID receives GPS, Galileo, SBAS and GLONASS signals.

Grams only

Hours of autonomy

Kilometers of range

Bluetooth range

Dimensions (MM)

Working temperature

Sensors

GNSS

External Antenna

Bluetooth & GNSS (87 mm)

Battery

Lipo 3.7V 420 mAh

Enclosure

Plastic

Fastening mechanism

3M DualLock

Charging time

1 hour

FAQs
Find the answer to your question quickly & easily

What is a Direct Remote Identification (DRI) system?

Direct Remote Identification (DRI) system transmits your drone’s basic information digitally via Bluetooth 2.4GHz to anyone equipped with a receiving device.  The system transmits the drone’s serial number, take-off position, latitude, longitude, altitude, speed and direction. As well as making airspace safer, this is a highly effective way of finding a drone that has lost its link and/or crashed.

Why equip your drone with a Direct Remote Identification system?

The Direct Remote Identification (DRI) systems are intended for drones that are not equipped with this device by default, and for drone manufacturers wishing to integrate the device into their aircraft.

These systems enable any drone to comply with the latest European regulations imposed by the EASA.

How do I connect to the Direct Remote Identification interface?

The Fly ID system has a web interface that can be accessed from any device via a WIFI connection. The web interface is only active during system initialisation (LED flashing yellow), and is deactivated after 30 seconds once the GPS signal has been acquired (LED flashing green).

Find the name of the Fly ID wifi network, then connect to this network. Open a browser, go to the address 192.168.1.1 and you’ll be connected to your beacon’s web interface.

How do I link my Direct Remote Identification system to my operator number?

Log in to your Fly ID’s web interface.

Click on “Settings”, then enter the type of aircraft and your operator number.

Your Direct Remote Identification (DRI) systems is now linked to your operator number.

 

What regulations do Dronavia's Direct Remote Identification systems comply with ?

The Fly ID range comply with the prEN 4709-002 standard, which requires direct remote identification for drones weighing more than 250 grams and flying at less than 120 metres in the specific category.

The Beacon AM remote identification beacon enables drones to comply the French DGAC Order of 27 December 2019.

For which drones should a Direct Remote Identification systems be used?

The use of a Direct Remote Identification (DRI) systems is mandatory for all drones (aircraft) weighing more than 250g that are not equipped with this device as standard.

Why do Direct Remote Identification systems have a web interface?

Fly ID systems have a web interface that can be accessed via WiFi to configure the beacon with your operator number and update the system.

Are Direct Remote Identification system visible on drone tracking applications?

All Direct Remote Identification (DRI) systems work with drone tracking applications (such as DroneScanner and OpendroneID). Open your application, start your system and it will appear on your application. You can retrieve all flight information from the application, and easily manage your flights.

E
Fly ID
E
Fly ID Pro
E
Fly ID Light
E
Zephyr Beacon AM