EASA MOC 2511 Certification is available
ZEPHYR CC
& SCALEFLYT
GEOCAGING
1541,17 € – 1749,17 € excl. VAT
WIRELESS CONNECTION TO DRONAVIA FTS
ADD-ON MODULE
Installation of the module takes only a few seconds and does not require any intervention inside the drone.
MOC 2511 compliance
Compatible with all Dronavia's FTS
Weighs just 70g
Powered by a 5V socket
WIRED CONNECTION FROM AUTOPILOT TO ESCS
FTS MODULE
Wiring connection between the autopilot and the ESCs (up to 8 universal channels). The connector datasheet with the different PINouts can be provided on request.
MOC 2511 compliance
Can be wirelessly pre-paired* to a Dronavia FTS or parachute.
Weighs just 70g
Powered by a 5V socket
Developped in collaboration with Thales
DRONE GEOCAGING SOLUTION
Flying drones close to critical areas is no simple matter. The risk of a drone penetrating a restricted area is high. Zephyr CC & ScaleFlyt Geocaging is a secure drone containment solution compliant with the latest standards published by EASA (MOC2511). Zephyr CC & ScaleFlyt Geocaging is the most advanced ground-based risk reduction system in the SORA methodology, enabling the drone to operate safely in a complex environment.
CREATE YOUR FLIGHT ZONE
The Zephyr CC & ScaleFlyt Geocaging FTS module allows you to create a virtual cage representing the flight area of your drone in order to fly your missions in complete serenity. Thanks to the compatibility between the Geocaging system and our FTS systems, if the drone leaves the flight envelope, the engine switches off automatically, ensuring that your drone stays within the limits you have set.
GET LIVE ALERTS, TAKE BACK CONTROL
The Zephyr CC & ScaleFlyt Geocaging FTS module will alert you if your drone approaches the limit of the flight zone too closely and risks crossing it. You can then correct its trajectory. If necessary, this module, coupled with the drone’s FTS, will automatically shut down the engine and alert you.
UNLOCK YOUR MOST COMPLEX FLIGHT MISSIONS.
The Zephyr CC & ScaleFlyt Geocaging solution can be used, for example, to secure out-of-sight flights (BVLOS) for drones used in inspection, agriculture, surveillance, events or even to secure the new air corridors dedicated to drone transport. Recently conforming to MOC2511 published by EASA, this module was used to ensure the safety of Europe’s largest drone show.
Automatic FTS triggering
Unlimited range
Wireless connection to your Dronavia parachute
Compatible with all drones
An application to manage your flight cages
To reduce activation time and increase the chances of avoiding a crash and accident, Kronos parachute systems incorporate an autonomous deploiement technology. This module triggers the parachute in less than 0.27 seconds, compared with around 3 seconds for a human trigger. Stay one step ahead and fully focused on your flying missions. .
EASA MOC2511 compliance
Dronavia is proud to be the first manufacturer to provide a system that is compliant with the MoC Light-UAS.25 published by EASA, an essential compliance in the development of a SORA. This essential compliance in the development of a SORA (Special Operations Risk Assessment) ensures that our customers have the best risk management and safety measures for their special operations, while staying ahead of future European standards. The MOC 2511 is sufficient to meet the requirements of Part 9.
Fully independant system
If the DJI drone loses its radio signal, the Dronavia system remains operational. If the link between the Klick remote control and your FTS is lost, the drone’s motors will not stop.
Module wirelessly connected to your FTS & Dronavia parachute
To make your safety system compatible, simply link your Geoacaging module to your existing FTS and parachute. The experts at Dronavia make it quick and easy. Once paired, all you have to do is position it on the drone, prepare its flight zone and then send the cage to the module using a USB dongle.
If the Geocaging module is triggered, your FTS and parachute will be activated.
grams only
power socket
unlimited trigger range
autonomous deploiement trigger time (sec)
dimensions (MM)
working temperature
ScaleFlyt by THALES
What is the MOC2511 published by EASA?
EASA has published a consultation document on means of compliance (MoC.2511) for light UAVs, focusing on the adoption of an autonomous Flight Termination System (FTS), defined as an emergency measure (not a contingency measure). This new certification came into force on 1 January 2023.
Dronavia is proud to be the first manufacturer to provide a system that is compliant with the MoC Light-UAS.25 published by EASA, an essential compliance in the development of a SORA.
This essential compliance in the development of a SORA (Special Operations Risk Assessment) ensures that our customers have the best risk management and safety measures for their special operations, while staying ahead of future European standards. The MOC 2511 is sufficient to meet the requirements of Part 9.
How does the MOC2511 make it quicker and easier to obtain a SORA?
Step 9 of the SORA deals with the risk of losing control of the aircraft and flying into adjacent areas where the risk to third parties (on the ground or in the air) may be higher. If the aircraft is not adequately designed, there may be probable reasons that could lead to an exit from the area of operation.
The operator must take into account criteria relating to adjacent areas and determine the level of containment (standard or reinforced) for the aircraft in question. For any reinforced containment system, the operator must: “declare compliance with the provisions of the document “Means of compliance with Light UAS.2511 – Reinforced containment”, or provide proof of such compliance (technical description, test reports, etc.) when applying for a permit. “
Why equip your drone with a Zephyr CC & ScaleFlyt Geocaging solution?
Flying drones close to critical areas is no simple matter. The risk of a drone penetrating a restricted area is high. Zephyr CC & ScaleFlyt Geocaging is a secure drone containment solution compliant with the latest standards published by EASA (MOC2511). Zephyr CC & ScaleFlyt Geocaging is the most advanced ground-based risk reduction system in the SORA methodology, enabling the drone to operate safely in a complex environment.
When can Zephyr CC and ScaleFlyt Geocaging solution be used?
The Zephyr CC & ScaleFlyt Geocaging solution can be used, for example, to secure out-of-sight flights (BVLOS) for drones used in inspection, agriculture, surveillance, events or even to secure the new air corridors dedicated to drone transport. Recently conforming to MOC2511 published by EASA, this module was used to ensure the safety of Europe’s largest drone show.
How do I install the Zephyr CC & ScaleFlyt Geocaging module on a drone equipped with a Flight Termination System (FTS)?
Simply pair your Zephyr CC & ScaleFlyt Geocaging module to your existing Flight Termination System. The experts at Dronavia make it quick and easy. Once paired, simply position the module on the drone, prepare a flight zone and then send this flight zone to the module using a USB dongle.
How do I install the Zephyr CC & ScaleFlyt Geocaging module on a drone without a Flight Termination System (FTS)?
A version of the Zephyr CC & ScaleFlyt Geocaging module can be connected between the autopilot and the ESCs (up to 8 universal channels). In addition to the Geocaging function, the module also becomes your Flight Termination System (FTS).
Can the Zephyr CC and ScaleFlyt Geocaging module work with a Dronavia Parachute Recovery System (PRS)?
If the Zephyr CC & ScaleFlyt Geocaging solution (Add-on or FTS version) is combined with a Dronavia Parachute Recovery System (PRS), the parachute will automatically deploy at the same time as the drone’s motor power supply is cut off.
What is a MOC (Means of compliance)?
An MoC (Means of Compliance) is a way for professional drone operators to demonstrate that they comply with the regulations and standards that apply to their activities, and to guarantee the quality and safety of the products they use. To obtain it, it is necessary to meet the current regulatory requirements published by EASA, the European Union’s Aviation Safety Agency.
In addition to the quality and safety offered by a product that complies with the MOCs proposed by EASA, professional drone operators can obtain a SORA (Specific Operations Risk Assessment) or PDRA (Pre-Defined Risk Assessment), flight authorizations issued for complex missions in a specific category.
How did Dronavia achieve MOC2511 compliance?
To obtain this compliance, Dronavia had to carry out numerous tests elaborated according to precise specifications provided by the EASA: repeated activating on the ground, at distance, in a real situation and determination of the maximum operating distance established at up to 3 km.
In parallel to these hundreds of tests, to go even further and push the reliability of our Flight Termination Systems (FTS) to the maximum, we decided to perform more than 1000 flight termination activation in order to guarantee the proper functioning of the drone with the Flight Termination System (FTS) for many years. A way to ensure that no matter what your special operation is, you will perform it safely.
What can Zephyr CC and the ScaleFlyt Geocaging solution achieve?
Thanks to the compatibility between Dronavia’s Flight Termination System (FTS) and the ScaleFlyt Geocaging solution developed by Thales, it is possible to automate the cut-off of the power supply to the drone’s motors, according to a flight zone previously created by the drone operator.
The ScaleFlyt Geocaging solution communicates wirelessly with Dronavia’s Flight Termination Systems (FTS), giving operators the assurance that their drones remain confined to the flight zone they have previously defined.
Why are there two Zephyr CC & ScaleFlyt Geocaging solutions?
To suit all drone operators and all types of drone, there are two versions of the Zephyr CC & ScaleFlyt Geocaging solution: an Add-on version and an FTS version.
The first “Add-on” version works with a Dronavia Flight Termination Systems (FTS) already installed on the drone. Simply add the Zephyr CC & ScaleFlyt module to the drone and it will link directly with the Flight Termination System (a pairing between the two systems is required).
The second “FTS” version works as a universal Flight Termination System that can be easily connected to the drone via a wiring connection between the autopilot and the ESCs (up to 8 universal channels).
How do I create a flight zone?
Simply connect to Google Earth (for example), create a flight zone and download it in KML format.
How do I import my flight zone into the Zephyr CC & ScaleFlyt Geocaging module?
Download the flight zone in KML format onto a USB key (from Google Earth, for example). Insert the USB key into a tablet (Android), then download the flight zone from the ScaleFlyt Geocaging application. Once imported into the application, the flight zone is taken into account by the module.
What is the range of the Zephyr CC & ScaleFlyt Geocaging module?
Once your flight zone has been imported into the application and onto your Zephyr CC & ScaleFlyt Geocaging module, there is no longer a range limit between the module and the operator for automatic activation of the Flight Termination System (FTS).
DJI Inspire 3 FTS
DJI Matrice 350/300 FTS
DJI Matrice 30 FTS
DJI Mavic 3 FTS
DJI Agras T10 FTS